Bonjour,
Acheté par correspondance a des inconnus ces risqué..
Sinon, je peux te faire un devis réparation pour te dire ce qu'elle a excactement.
Mais avant toute chose, il faut voir si ta puce fonctionne correctement et pour ceci il faut savoir la faire fonctionner.
Voici le mod de fonctionnement de ta puce :
" Sur la Team Officiel Je Précise"
" PS2 games
Method 1:
-Press EJECT button to switch on the machine.
-Insert PS2 game in tray.
-Tap RESET button once, the machine would reboot and then load your game.
Method 2:
- Press EJECT button to switch on the machine.
- Insert PS2 game in tray, the press EJECT button to close tray.
- The disc will then take 2-5 seconds to be recognized and then boot.
To boot another game when already playing a game.
- Press EJECT button.
- The current game would then pause and the tray would come out.
- Change to another PS2 game disc and tap RESET button once.
- The machine would reboot and then load your game.
PSX games
- Press EJECT button to switch on the machine.
- Insert PSX game in tray, then press and hold RESET button to switch off machine.
- Now hold the RESET button to start up your machine. Only release the RESET button once the Blue LED light of the Eject button lights up.
DVD movies
- Press EJECT button to switch on the machine.
- Insert DVD movie in tray, then press and hold RESET button to switch off machine.
- Now hold the RESET button to start up your machine. Only release the RESET button until the "blue clouds" comes up on the TV.
Disable Mode
- Hold the RESET button until the "blue clouds" comes up on the TV.
Additional information
V9 and v10 LA chip syndrome.
It is a well documented fact that the latest v9 and v10 machines suffer from a major problem. The LA chip has a tendency to die. After it dies, the only solution to get your machine working again is to replace the chip with an original LA6508 or a device called LA6508 RII. However, in both cases, it is quite a hard soldering job. (much harder than to install a chip). The following can be done to reduce the chances of the LA 6508 chip dying. Again do not attempt the simple modification unless you know what you are doing. "
Peut être un problème due a ta méthode de boot...
Mode linéaire
