Voila le probleme, c'est un NEC 2510A 2.16 dans un boitier USB 2.0 + le cable adapté, branché a mon portable.(USB 2.0 OK)
J'avait ce probleme dés l'achat de mon graveur mais je l'avait resolu...
J'avait fait tellement de choses que maintenat je ne me rappele plus ,et de toute facon je n'avait pas compris c'etait quoi la solution...
Alors avant tout j'ai desactivé la gravure XP, DMA=on (bon on est en externe USB...)mon graveur est correctement reconu par XP et NERO 6.6.0.0.1.
Alors je lance la gravure d'un .nrg et : "une initialisation est survenue"
"comande SCSI interompue"
"impossible d'effectuer la fonction
Disc At Once"
et ceci juste apres le debut de la preface, voila le Log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 08:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Version de Nero : 6.6.0.1 (Nero Express)
Graveur : Version: 2.16 - HA 2 TA 0 - 6.6.0.1
Pilote d'adaptateur : HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM : Version: JKU5 - HA 1 TA 0 - 6.6.0.1
Pilote d'adaptateur : HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST94011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype COMBO LSC-24082K atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype COMBO LSC-24082 D: CDRom0
_NEC DVD_RW ND-2510A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 247MB (253296kB)
Free physical memory: 77MB (79844kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2004
Graver une image DVD
22:40:10 #1 Text 0 File Reader.cpp, Line 127
Reader running
22:40:10 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running
22:40:10 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1841868800
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=199:49.25 ( 899200)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name:
22:40:10 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disque entier, using DVD media
22:40:10 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 899199 (199:49.24, 1756MB)
22:40:10 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
22:40:10 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: MCC 01 - RG20
Disc Application Code: 64, Disc Physical Code: 193
22:40:10 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899200 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------
22:40:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1841561600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
899200 | lead-out | 1 | 0x00 | 0x41
22:40:10 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Début de mise en cache des fichiers
22:40:11 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
22:40:11 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Cache des fichiers terminé
22:40:11 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Début de gravure à 2x (2 770 Ko/s)
22:40:11 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:40:11 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 11:34,166 (694166ms) -> OK
22:40:11 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode
22:40:11 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON
22:40:11 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes
22:40:11 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:40:11 #21 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:40:11 #22 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09C94000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
22:40:11 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:40:11 #24 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:40:11 #25 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
22:40:13 #26 Text 0 File Cdrdrv.cpp, Line 1284
22:40:13.109 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later
22:40:13 #27 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06CB0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
22:40:13 #28 CDR -500 File Writer.cpp, Line 311
Commande SCSI interrompue
_NEC DVD_RW ND-2510A\H2 T0
22:40:13 #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:40:13 #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:40:13 #31 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was -1
22:40:13 #32 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:40:13 #33 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:40:13 #34 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
22:40:13 #35 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
22:40:13 #36 CDR -1114 File WriterStatus.cpp, Line 167
Une initialisation est survenue
22:40:13 #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Impossible d'effectuer la fonction Disc At Once
22:40:13 #38 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
22:40:13 #39 Phase 38 File dlgbrnst.cpp, Line 1853
La gravure a échoué à 2x (2 770 Ko/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 07:53:02
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
___________
help help ______
port Amilo 2.4GhCeleron
NEC 2510A 2.16
Mode linéaire
