C'est écrit dans le readme du birdy!
Restoring your drive (Requires previously saved Firmware Image)
---------------------------------------------------------------
- Plug SATA cable from DVD drive to PC
- Power cable drive still connected to Xbox 360
- Ensure drive is in mode b either by two wire trick or slax linux boot cd or if you
have the Xtreme 1.2 then use the TWEAK starting the box with the tray opened
- Go to Windows
- Run hitachiflash.exe and if the drive is properly connected it should get detected
- Choose the Action: "Restore Original firmware"
- Hit go and wait,
- There will be a prompt asking for your original UNENCRYPTED image
- The restore must start, if some "retry" windows appears hit YES/OUI until finished
- At the end the application will check for 100% so you can shut down the system
|