j'ai trouver comment l'istaller ds le .txt
Installation for Dark_Alex 2.71 SE-C Custom Firmware
----------------------------------------------------
1. Copy /IRSHELL folder to your ms.
2. If you've set firmware 2.71 to use /PSP/GAME & firmware 1.5 to use /PSP/GAME150, do the following:
- Copy /PSP/GAME/irshell271 to ms0:/PSP/GAME/irshell271
- Copy /PSP/GAME/irshell150 to ms0:/PSP/GAME150/irshell150
- Copy /PSP/GAME/irshell150% to ms0:/PSP/GAME150/irshell150%
- Run iR Shell via firmware 1.5 EBOOT icon (the Red one), start the Configurator and set your "Homebrew Path" to ms0:/PSP/GAME150
3. If you've set firmware 2.71 to use /PSP/GAME271 & firmware 1.5 to use /PSP/GAME, do the following:
- Copy /PSP/GAME/irshell271 to ms0:/PSP/GAME271/irshell271
- Copy /PSP/GAME/irshell150 to ms0:/PSP/GAME/irshell150
- Copy /PSP/GAME/irshell150% to ms0:/PSP/GAME/irshell150%
- Run iR Shell via firmware 2.71 EBOOT icon (the White one), start the Configurator and set your "Homebrew Path" to ms0:/PSP/GAME271
4. To use launch XMB feature when running firmware 1.5 mode of SEC, you'll need to install a complete firmware 1.5 dump to devhoook directory. This is because SE-C only has a subset of firmware 1.5 files in flash, you'll need a full set to launch 1.5 XMB.
- Install a full firmware 1.5 dump to ms0:/dh/150
5. If you want to use adhoc PC connection for nethostfs access under fw 1.5 mode of SE-C, you'll need to install the network files from firmware 1.0.
- ms0:/IRSHELL/SYSTEM/ifhanlde.prx
- ms0:/IRSHELL/SYSTEM/pspnet.prx
- ms0:/IRSHELL/SYSTEM/pspnet_apctl.prx
- ms0:/IRSHELL/SYSTEM/pspnet_inet.prx
- ms0:/IRSHELL/SYSTEM/pspnet_resolver.prx
6. Since you can now run iR Shell under both firmware 1.5 & 2.71 mode of SE-C, you should always pay attention to which firmware mode you're using. Check the firmware version indication on the top right corner (next to the CPU Speed). By default, you'll have 2 different sets iR Shell configuration files for the 2 firmwares, you should note that changing the config in firmware 1.5 mode won't affect the config in firmware 2.71 mode or vice versa. This allows greater feasibility in control. However, if you want to have a single common configuration for both firmware versions, you can do so. Refer to the User Guide for details on using common configuration.
|