Afficher un message
Vieux 05/01/2006, 19h29   #7 (permalink)
Profil
MaPomme
Membre Respecté
Ancienneté  92%
Ancienneté 92%
 
Avatar de MaPomme
 
Date d'inscription: mai 2006
Messages: 3 211
Téléchargements: 0
Uploads: 0
Merci: 0
Remercié 22 fois dans 4 Posts
Par défaut


Extrait du Readme du firmware 1.7.5:

PS2 SCREEN FIX : OFF : Disables PS2 video fix.

COLOR : Games will be output on their original video mode (PAL/NTSC)
with color correction applied to match your PS2 region.

PAL : Force video mode to PAL

NTSC : Force video mode to NTSC

PAL60 : Force all games to NTSC with color correction.
Games will run faster but screen might need adjusting.

VGA : Enable 640x480 VGA mode.

Y SCREEN FIX : OFF : Y screen position fix is disabled.

AUTO : Y position fix enabled with default settings.
Should be fine for most television sets.

+/- N : Fine tune Y position.
Positive values move the screen down, Negative values move it up.

PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix

PSX MULTI DISK : ON/OFF : Enable/Disable PSX multi disk support

MC16 PATCH : ON/OFF : Enable/Disable DATEL memory card support

ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch. When ATAD auto-patching is enabled,
you can use a non-Sony HDD as though it was an official Sony drive.

MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch

GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies

DVD VIDEO REGION : 1..8 : Selects the DVD player region.
Use it to match the corresponding region on RCE protected discs.

DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch

BOOT MODE : AUTO : Normal behaviour. All discs will autoboot.

FAST : FastBoot.
Same as pressing SELECT on boot.

INFMAN : Execute Infinity Manager on mc0:
Same as Pressing TRIANGLE on boot.

DEV1 : Execute BOOT.ELF on mc0:
Same as Pressing R1 on boot.

DEV2 : Execute BOOT.ELF on HDD
__________________
MaPomme est déconnecté   Réponse avec citation