salut! voilà la qoob team a sorti la version finale du bios 1.3 pour pro et sx en éliminant le bug qui était apparu depuis la v1.1 apparemment

download: http://ngcdev.com/modules.php?name=D...p=getit&lid=55

ps: pour ceux ayant déjà la version beta pas besoin de reflasher car il semble qu'il n'y ait pas de changement

ils expliquent même le probleme lol:

This is the v1.3a final.

This release only fixes the distressing bug that some
(most) games which are using audio streaming crashed
on some (most) drives.

A nameless coder of our team tried to save some time
by not typing some "b" in the assembly instruction of
our drivecode, thus messing up the "set audio buffer
config" command. No wonder that it didn't worked as
well as expected. This has nothing to do with the
"audio stream fix". That one ever worked perfectly
and was integrated way before 1.0. The bug was
introduced while implementing the disc-swap thing.


The coder in-charge has been beheaded and won't do any
faults again. We apologize for the inconvenience caused.
We hope you accept our apology.




il y a également une mise au point sur la qoob sx:

This time we also added the SX version. Be sure
to use the correct flasher tool. Flashing an SX
with the Pro tool won't work, same goes for doing
it vice-versa.

NOTE for SX users:

YOU CAN *NOT* BREAK YOUR SX BY FLASHING WRONG FIRMWARE
INTO IT.

The SX has an integrated "backup" bios. You can go
into it by holding the D-Pad to the left (D-pad is
the small digital pad at the lower left of the controller).
Do not boot the disc, you also have to press 'B'.

You *need* to start the upgrader from this bios. This
is done due to protect you from evil applications which
could otherwise erase your bios. Still, the backup
bios is read only and can't be erased.

So there's ********ly no way to kill your SX. If you flash
something else to it, all it would do is to stop
booting until you boot into the recovery bios.

To summarize it:

- Don't panic. You can't break your SX by flashing.
- You can't flash .GCB files, you need the .ELF updaters.
- To flash via DVD, you need to hold "D-Pad-Left" while
booting. Be sure to pad your disc to at least ~1GB of
data!
- To flash via Network, you need to hold "D-Pad-Left"+"B"
while booting. IP address will be 192.168.1.32. There's
no way to change that.

Have fun!