Voila à quoi ressemble un vrai scan SMART, pas juste un OK fourni par un logiciel qui interprete ces données.
Code:
sudo /Applications/SMARTReporter.app/Contents/Resources/smartctl -a /dev/disk1
smartctl 5.41 2011-04-06 r3314 [i386-apple-darwin9.8.0] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Corsair Force GT
Serial Number: 1134820300000707034B
LU WWN Device Id: 0 000000 000000000
Firmware Version: 1.3
User Capacity: 120,034,123,776 bytes [120 GB]
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Sun Jun 3 20:06:52 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 19345941
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 17154099384944
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 321
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 6
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 1
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 042 069 000 Old_age Always - 42 (Min/Max 17/69)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 19345941
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 19345941
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 19345941
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 1849
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 1500
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 1500
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 2864
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.