Soit il est deffectueux, soit (plus probable) tu as un Fake et tu as été victime du fakekiller contenu dans la MAJ 1.17!
Il y a un tuto en Anglais expliquant comment remettre les fakes en état! Il y a 2 méthodes!

Tutorial - Recover your fake/clone DSTT card!!


I wrote this tutorial for people who have a clone (fake) DSTT which stopped working after they updated their DSTT's with firmware 1.16 . Also when you have a clone card you can make it ''genuine'' by flashing it with this tutorial. The fake .bin file in the fake/clone dstt wil be replaced with a genuine .bin file so you can use every firmware even from the REAL DSTT site.

You'll need this: Fake/clone DSTT , Real (Genuine) DSTT or any other Working Flashcard , MicroSD . OR IF YOU ONLY HAVE A FAKE CARD SCROLL DOWN BELOW THERE'S ALSO A TUTORIAL FOR FAKE CARD ONLY!!


1. Download the recovery files here : RapidShare: Easy Filehosting
2. Open DSTTRecovery.exe .
3. Fill in the path of your MicroSD, e.g. G: of E: , and click ''Install''
4. The files who will be needed to recover your DSTT will be placed on the MicroSD.
5. Put your MicroSD in a REAL (Genuine) DSTT (or any other Working Flashcardlike R4/M3), turn on your NDS and start ''FakeRecovery.nds'' .
6. The Recovery Utility will load things, this can take a while. After it's done loading it will ask you, to put your Fake/Clone DSTT in your NDS.
7. After you put your fake DSTT into your NDS you must press ''A'' , after a few secs it asks you to press ''A'' another time.
8. If the flashing is succeeded you'll see a message on your screen that the recovery was successful
9. Use firmware 1.15 don't use 1.16 because after a while your fake card will be bricked again.

Note : There doesn't have to be a MicroSD in your fake/clone card.


How to recover your fake card without a working flashcard


1. Download the adjusted recovery files here (They are not the same as the other link!~!) : RapidShare: Easy Filehosting
2. Open DSTTRecoverFakeCard.exe .
3. Fill in the path of your MicroSD, e.g. G: of E: , and click ''Install''
4. The files who will be needed to recover your DSTT will be placed on the MicroSD.
5. Put your MicroSD in your FAKE DSTT ,then turn on your NDS.

NOTE : This can take many times because your DSTT is fake and sometimes your NDS freezes!!

6. When the DSTT is loaded start ''FakeRecovery.nds'' . The Recovery Utility will load things, this can take a while. After it's done loading it will ask you to press ''A'' , after a few secs it asks you to press ''A'' another time.
8. If the flashing is succeeded you'll see a message on your screen that the recovery was successful
9. Use firmware 1.15 don't use 1.16 because after a while your fake card will be bricked again.


Ensuite il faut installer ce fichier sur le DSTT

GBAtemp.net :: Downloads :: Other flashcarts and adapters :: DSTT kernel v1.17 - fake killer disabled