[hyndrid]

jai esseyer et sa me fait la meme erreur

mon orig.bin est peut-etre pas valide poutant dans toolbox la clé semble correcte

j'ai récupere mon orig.bin avec dosflash 32 car sous dos jai cette erreur :C:\DOCUME~1\BARACO~1>dosflash e000
DOSFLASH V1.6 Beta Build 20080912 by Geremia, Modfreakz and Kai Schtrom
DOSFLASH [R|W|E] [PORT] [PORT TYPE] [DRIVE POS] [MTK TYPE] [FLASH TYPE]
[FLASH SIZE] [FLASH CHIP ERASE OPCODE] [FILE NAME]
[SEND ATAPI DEVICE RESET]
R: Read FLASH
W: Write FLASH
E: Erase FLASH
PORT: Port to send command to
PORT TYPE: 0 for IDE, 1 for SATA
DRIVE POS: A0 for Master, B0 for Slave
MTK TYPE: 0 for 0x70 par, 1 for 0x73 ser, 2 for 0x72 ser
FLASH TYPE: 0 for normal handling, 1 for serial SST
FLASH SIZE: size of flash chip in number of banks
FLASH CHIP ERASE OPCODE: individual chip erase opcode command byte
this is only needed for erasing a serial flash
FILE NAME: name of the file to read/write from/to flash
SEND ATAPI DEVICE RESET: 0 for no, 1 for yes
All numbers are intepreted as hex values!