Afficher un message
Vieux 07/07/2007, 11h59   #1 (permalink)
Profil
Yoshee
-= Serial Troker =-
Ancienneté  72%
Ancienneté 72%
 
Avatar de Yoshee
 
Date d'inscription: mai 2006
Localisation: Le Havre
Âge: 40
Genre : Homme
Pays :
Messages: 9 061
Téléchargements: 1
Uploads: 1
Entrées dans le blog: 2
Merci: 25
Remercié 148 fois dans 86 Posts
Par défaut C4EVA_iXTRM-HITACHI_v1_2_Stealth

Code:
C4EVA_iXTRM-HITACHI_v1_2_Stealth
-----------------------------------------------------------------------



Media Stealth, Disc-Jitter,Xbox 360 backup firmware modification!


Features
-----------------
(v1.2) Extra verification performed on Stealth backups
(v1.1) Extra verification performed on Stealth backups
(v1.0) Defeats all current Xbox Live detection attempts
(v1.0) Boots ONLY Stealth Xtreme Xbox 360 backups
(v1.0) Boots ONLY Stealth Xtreme Xbox 1 backups
(v1.0) Boots all Xbox 360 originals
(v1.0) Boots all compatible Xbox 1 originals on Xbox 360

Use on Xbox Live at own risk



Technical details
------------------------

Defeats all current and some future Xbox Live detection attempts.

Thanks to all the beta testers,everyone involved for without their effort this would not have been possible. Keep up the good work everyone. Thanks also go to Fuzzylogic and GAryOPA.
Commodore4Eva@gmail.com

Always recommended: If your drive is flashed USE A RESTORE FIRST
(Use the restore included on this package)


Two Commands (for flashing use only one: FlashIX):

FLASHIX.BAT: Flashes your drive with iXtreme 1.2 Fw Stealth (Media Detect 2,
and Firwmare Stealth, (NO F900 Core)

RESTORE.BAT: Return your drive to original State, even if you have
firmware stealth in your drive


*RECOMENDATION: If you have flashed your drive in the past use RESTORE
first. If it is a brand new drive use directly the Flash command you
like.






Flashing your drive
-------------------
FLASHIX.BAT automatically makes a complete backup of your firmware system

* To FLASH a drive, it must be in "Mode B" and have "Drive Letter"
* Then just run FLASHIX from "Command Prompt" while inside windows
* Prompt must be at the same directory with the rest of the files!

* FLASHIX needs two variables, the assigned "Drive Letter", and any 4
numbers for the BACKUP directory, use a new unique number like 1672

- This is used to make your BACKUP directory!

- For Example: FLASHIX.BAT H 1672

- Will cause the FLASH after running to have, a BACKUP directory
"X16S-1672" and the program will store FIVE firmware files:

---- key.bin ---- DRIVE KEY /// DRIVE KEY
---- was.bin ---- Your drive before FLASH
---- gdrXX.bin ---- The untouch original fw
---- XX_23.bin ---- The patched iXtreme fw
---- now.bin ---- Your drive after FLASH!

- Where the XX in the above names will be the version of your Hitachi

* Program will not start unless a BACKUP is correctly made and stored!

* Flash will auto-detect your firmware build of your Hitachi drive.

* You can flash any drive, even "v1.1" or "f900" or your own hacks.

* System will check flashed firmware, and redo until 100% completed.

* Once you get the PASS / DONE line, you can shut-down the system.



Restoring your drive
--------------------
RESTORE.BAT automatically restores your drive back to original state

* To RESTORE a drive, it must be in "Mode B" and have "Drive Letter"
* Then just run RESTORE from "Command Prompt" while running windows.

* The new RESTORE does not need any backup, it will 100% restore your
drive back to "ORIGINAL" state as long as it is visible in Windows!

* Program will not start unless it detects the version of your Hitachi!

* You can restore any drive, even "v1.1" or "f900" or your own hacks.

* System will check flashed firmware, and redo until 100% completed.

* Once you get the PASS / DONE line, you can shut-down the system.
Et voilà, les lecteurs Hitachi ne sont pas laissés au placard
Biensur, pas de lien ici pour le firmware, à vous de chercher
Yoshee est déconnecté   Réponse avec citation